← Back to Quality & Compliance GMP Facility

Inside a Modern GMP Facility

The Production Line

1 Dispensing Accurately weighs each raw material and excipient to the batch formula inside a controlled dispensing booth.
2 High-Shear Mixer Rapidly blends API and excipients into a uniform powder and wet-masses it ready for granulation.
3 Granulator Converts fine powder into uniform granules to improve flowability and compressibility.
4 Fluid-Bed Dryer Dries wet granules to a target moisture with clean hot air; spray drying is sometimes used to form powders.
5 Blender Gently blends dried granules with lubricant and disintegrant into the final compression mix.
6 Tablet Press Compresses the final blend into tablets with controlled weight, hardness and thickness.
7 Coating Pan Sprays a thin film coat for protection, taste-masking, identity, or controlled release.
8 Blister Packing Seals tablets into blisters to guard against moisture and light and keep each dose intact.
9 Cartoner Packs blisters and leaflets into cartons and prints the batch number and serialization codes.
10 QC Lab Tests raw materials, in-process samples and finished product against specification before release.
Powder
›
Granules
›
Tablet
›
Coated
›
Blister
›
Carton

Cleanroom Air & Pressure Cascade

+15 Pa Corridor →
+30 Pa Airlock →
+45 Pa Production

HEPA-filtered laminar airflow · cascading positive pressure

1

Material Receipt

Quarantine, sampling, supplier status

2

Dispensing

Batch formula check, controlled weighing

3

Mixing

API and excipients blended uniformly

4

Granulation

Wet massing, endpoint and particle control

5

Drying

Target moisture and temperature control

6

Final Blending

Lubricant and disintegrant addition

7

Compression

Tablet weight, hardness, thickness

8

Coating

Film protection, identity, taste masking

9

Packaging

Blister, leaflet, carton, coding

10

QC / QA Release

Testing, record review, release decision

QA Pass → Released Rework ↺